hipecs CIO150 CANopen analog IO
The hipecs CIO150 module is a CANopen IO module for decentral IO extension of controller systems. With this module the system can be easily extended with 8 analog inputs and 4 analog outputs via CANopen. Applications are for example machinery, industrial automation and building automation.
system
- supply voltage 11 .. 32V DC (typ. 24V DC)
- cable cross section 0.08 .. 1,5 sqmm (AWG28 .. AWG14)
- temperature range 0 .. 55°C / -40 .. 70°C
- MTBF (40°C) 1790774 hours
- plastic housing for DIN rail mounting
- measurements ca. (LxBxH) 54 x 125 x 62 mm (with connector)
analog inputs
- 8 inputs (-10..+10V / 0..+10V)
- 16 bit resolution
- galvanic separation from controller system
analog outputs
- 4 outputs (-10..+10V / 0..+10 volt / -5..+5V / 0..+5V)
- maximum permanent output current 10 mA per channel
- short circuit protected (current limitation 20mA)
- galvanic separation from controller system
CANopen
- 1 CAN-Bus according to ISO11898
- CAN-Baudraten adjustable up to 1 Mbit
- node number adjustable from 1 .. 127
- CANopen draft standard DS301 V4.0 / DS401 V2.1
- CANopen diagnosis LEDs
- 4 receive / 4 transmit PDOs
- 1 SDO server
- PDO event timer
- PDO inhibit timer
- PDO transmit modes: event triggered, synchronous, asynchronous, cyclic, anticyclic, remote frame
- variable PDO identifier
- dynamic PDO mapping
- emergencys
- nodeguarding/lifeguarding/heartbeat
- EDS file
downloads
ordering information
| article number | article | housing | temperature range (°C) | galvanic isolation |
| EZ00000.2205.00 | hipecs-CIO150-i | plastic | 0..+55 | yes |
| EZ00000.3150.00 | hipecs-CIO150-ie | plastic | -40..+55 | yes |
newsblog hipecs CIO150
29.06.2012: Datasheet for the hipecs CANopen object dictionary online.
31.01.2012: New datasheet revision available.
25.11.2011: English datasheet available.
