hipecs CIO180 CANopen IO module
The hipecs-CIO180 is a CANopen IO module which has both, digital and analog inputs and outputs. 8 inputs and 8 outputs can be used digital. Analog values between 0 and + 10V can also be measured at a further 4 inputs or set at 2 outputs.
CANopen is available in accordance with DS301 and DS401. All common baud rates of up to 1 Mbit/s are supported.
system
- supply voltage 18 .. 32V DC (typ. 24V DC)
- cable cross section 0.08 .. 1,5 sqmm (AWG28 .. AWG14)
- temperature range 0 .. 55°C / -40 .. 70°C
- plastic housing for DIN rail mounting
- measurements ca. (LxBxH) 54 x 125 x 62 mm (with connector)
digital inputs
- 8 inputs (24V)
- status-LEDs
digital outputs
- 8 outputs (24V) highside swichting
- max. output current @25°C: 300mA
- peak output current 1 A (max. 1 sec)
- short circuit protected
- status-LEDs
- galvanic separation from controller system
analog inputs
- 4 inputs (0..+10V)
- resolution 12 Bit
analog outputs
- 2 ouputs (0..+10V)
- resolution 10 BIT
CANopen
- 1 CAN-Bus according to ISO11898
- CAN-Baudraten adjustable up to 1 Mbit
- node number adjustable from 1 .. 63
- CANopen draft standard DS301 V4.0 / DS401 V2.1
- CANopen diagnosis LEDs
- 4 receive / 4 transmit PDOs
- 1 SDO server
- PDO event timer
- PDO inhibit timer
- PDO transmit modes: event triggered, synchronous, asynchronous, cyclic, anticyclic, remote frame
- variable PDO identifier
- dynamic PDO mapping
- emergencys
- nodeguarding/lifeguarding/heartbeat
- EDS file
ordering information
article number | article | housing | temperature range (°C) | galvanic isolation |
EZ00000.2211.01 | hipecs-CIO180-i | plastic | 0..+55 | yes |
EZ00000.3180.01 | hipecs-CIO180-ie | plastic | -40..+70 | yes |
newsblog hipecs CIO180
20.05.2017: hipecs CIO100 available as from now