hipecs CIO62 CANopen Modul with 2 digital Outputs
The hipecs-CIO62 module is a compact CANopen I / O system with 2 digital power outputs. These are 24V high-side switching and can drive loads with up to 6A continuous current consumption.
Setting of Node-ID and CAN baud rate is done using DIP switches.
In this module the complex CANopen standards DS301 and DS401 are implemented. All usual baud rates up to 1 MBit are supported.
system
- supply voltage 11 .. 32V DC (typ. 24V DC)
- cable cross section 0.08 .. 1,5 sqmm (AWG28 .. AWG14)
- temperature range 0 .. 55°C / -40 .. 55°C
- plastic housing for DIN rail mounting
- dimensions (LxBxH) 18 x 90 x 62 mm (with connector)
output channels
- 2 digital outputs 24V / 6A
CANopen
- 1 CAN-Bus according to ISO11898
- CAN-Baudraten adjustable up to 1 Mbit
- node number adjustable from 1 .. 63
- CANopen draft standard DS301 V4.2 / DS401 V3.1
- CANopen diagnosis LEDs
- 4 receive / 4 transmit PDOs
- 1 SDO server
- PDO event timer
- PDO inhibit timer
- PDO transmit modes: event triggered, synchronous, asynchronous, cyclic, anticyclic, remote frame
- variable PDO identifier
- dynamic PDO mapping
- emergencys
- nodeguarding/lifeguarding/heartbeat
- EDS file
ordering information
article no. | article | housing | temperature | galvanic |
EZ00000.2462.00 | hipecs-CIO62-i | plastic | 0..+55 | yes |
EZ00000.3462.00 | hipecs-CIO62-ie | plastic | -40..+55 | yes |