The frenzel & berg electronic CO4031 CANopen-HMI-module supports all necessary functions for simple operating and display devices. Interfaces for an LCD display, matrix keyboard, LED's and signalling devices are already implemented. The setup for CANopen node number, baud rate and device configuration is done by external resistors or DIP switches.

system

• CO4031 CPU
• supply voltage 5V DC
• temperature range -40 .. +85°C
• plug-in module
• measurements 41 x 31 x 18 mm

interfaces

• display interface for up to 4x20 character
• keyboard interface for a matrix keyboard with up to 64 keys
• LED-interface matrix for up to 32 LED's
• signaling device interface digital (on/off)

CANopen

• CAN-Bus CAN V2.0b
• CAN-baudrate up to 1Mbit
• node number 1 .. 127
• CANopen Draft Standard DS301 V4.0 / DS401 V2.0
• CANopen diagnostic LEDs (output for LEDs)
• PDOs receive/transmit 1/2
• SDOs Server/Client 1/0
• PDO-Event Timer
• PDO-Inhibit Timer
• PDO-transmission mode event triggered, synchron,
  asynchron, cyclic, anti cyclic, remote frame
• variable PDO-identifier
• dynamic PDO-mapping
• emergency
• nodeguarding/lifeguarding/heartbeat
• object dictionary/configuration storable
• minimum boot up
• EDS-file
 

downloads

datasheet

EDS-File

ordering information