The frenzel + berg electronic CO4013-joystick-controller provides all functions needed for industrial joysticks. Programming of the device is not necessary. Interfaces for up to 4 axes, Switches and LED's are already implemented. The setup for node-number, baudrate and device configuration is done by external resistors.

system

• 16 bit CPU
• supply voltage 5V DC
• temperature range -40 .. +105°C
• housing QFP64

inputs / outputs

• 4 analog inputs (axes) for potentiometer/active sensors
• 4 inputs for broken cable detection
• 20 digital inputs for switches or sensors
• 4 digital outputs

functions

• axis hold function 
• adjustable deadband

CANopen

• CAN-Bus V2.0b
• CAN-baudrates up to 1Mbit
• nodenumber 1 .. 127
• CANopen draft standard DS301 V4.0 / DS401 V2.0
• CANopen diagnosis LEDs (LED outputs)
• PDOs receive/transmit 1/2
• SDOs server/client 1/0
• PDO-event timer
• PDO-inhibit timer
• PDO-transmission mode event triggered, synchron,
  asynchron, cyclic, anti cyclic, remote frame
• variable PDO-identifier
• dynamic PDO-mapping
• emergency
• nodeguarding/lifeguarding/heartbeat
• objectdictionary / configuration storable
• minimum boot up
• EDS-file

downloads

datasheet

EDS-file

ordering information