hipecs CIO51 Full-Bridge Driver

The hipecs CIO51 module is a CANopen I/O module for decentral IO extension of controller systems. With this module the system can be easily extended with 2 Full-Bridge Drivers for DC motors via CANopen. Applications are for example machinery, industrial automation and building automation.

 

system

  • supply voltage 11 .. 32V DC (typ. 24V DC)
  • cable cross section 0.08 .. 1,5 sqmm (AWG28 .. AWG14)
  • temperature range 0 .. 55°C / -40 .. 55°C
  • plastic housing for DIN rail mounting
  • measurements ca. (LxBxH) 18 x 90 x 62 mm

outputs

  • 2 outputs (24V) Full-Bridge Drivers
  • max. output current @25°C: 1A
  • short circuit protected

CANopen

  • 1 CAN-Bus according to ISO11898
  • CAN-Baudraten adjustable up to 1 Mbit
  • node number adjustable from 1 .. 63
  • CANopen draft standard DS301 V4.0 / DS401 V2.1
  • CANopen diagnosis LEDs
  • 4 receive / 4 transmit PDOs
  • 1 SDO server
  • PDO event timer
  • PDO inhibit timer
  • PDO transmit modes: event triggered, synchronous, asynchronous, cyclic, anticyclic, remote frame
  • variable PDO identifier
  • dynamic PDO mapping
  • emergencys
  • nodeguarding/lifeguarding/heartbeat
  • EDS file

downloads

datasheet

EDS-file

 

ordering information

article numberarticlehousingtemperature
range (°C)
galvanic
isolation
EZ00000.2151.01hipecs-CIO51-iplastic0..+55yes
EZ00000.3051.00hipecs-CIO51-ieplastic-40..+55yes

 

 

TEXTPDF Download

support

technical support and help for frenzel + berg products

For technical questions please contact our support-service: support@frenzel-berg.de