The hipecs-CIO27 is a very compact cost-efficient CANopen unit with a single analog current input 0-20 mA or 4-20 mA. The input is protected against short circuits and over current conditions. The CAN bus is not isolated.

CANopen is available according to DS301 and DS401. Mostly used baud rates available(1 Mbit/s, 500 Kbit/s, 250 Kbit/s and 125 Kbit/s) 8 identifiers adjustable Baudrate and identifier are via jumper selectable. 

system

• supply voltage 10 .. 28V DC (typ. 24V DC)
• cable cross section 0.12 .. 1,30 sqmm (AWG26 .. AWG16)
• temperature range -20 .. 55°C
• plastic housing for DIN rail mounting
• measurements ca. (LxBxH) 23 x 83 x 50 mm (with connector)

digital inputs

• 1 input track A,B,Z (RS-422)
• 3 inputs (24V)
• status-LEDs

digital outputs 

• 2 outputs (24V) highside swichting
• max. output current @25°C: 2,0 A
• peak output current 4,0 A (max. 1 sec)
• short circuit protected
• status-LEDs

CANopen

• 1 CAN-Bus (ISO11898)
• CAN-Baudraten adjustable up to 1 Mbit
• 8 node numbers adjustable (1, 3, 9, 11, 33, 35, 41, 43)
• CANopen draft standard DS301 V4.0 / DS401 V2.1
• CANopen diagnosis LEDs
• 4 receive / 4 transmit PDOs
• PDO event timer
• PDO inhibit timer
• PDO transmit modes: event triggered, synchronous, asynchronous, cyclic, anticyclic, remote frame
• variable PDO identifier
• dynamic PDO mapping
• emergencys
• nodeguarding/lifeguarding/heartbeat
• EDS file

downloads

datasheet

EDS-file

ordering information