The hipecs-CIO26 is a very compact cost-efficient CANopen unit with a single analog output. Resolution is 12 bits. Output range 0 to +10 V.

CANopen is available according to DS301 and DS401. Mostly used baud rates available (1 Mbit/s, 500 Kbit/s, 250 Kbit/s and 125 Kbit/s) 8 identifiers adjustable. Baud rate and bus-terminator and identifier are via jumper selectable. The CAN bus line is not isolated.

system

• supply voltage 10 .. 28V DC (typ. 24V DC)
• cable cross section 0.12 .. 1,30 sqmm (AWG26 .. AWG16)
• temperature range -20 .. 55°C
• plastic housing for DIN rail mounting
• measurements ca. (LxBxH) 23 x 83 x 50 mm (with connector)

outputs analog

• 1 output (0 ... +10V)
• resolution 12 Bit
• output current (max) 15 mA
• short circuit protected

CANopen

• 1 CAN-Bus (ISO11898)
• CAN-Baudraten adjustable up to 1 Mbit
• 8 node numbers adjustable (1, 3, 9, 11, 33, 35, 41, 43)
• CANopen draft standard DS301 V4.0 / DS401 V2.1
• CANopen diagnosis LEDs
• 4 receive / 4 transmit PDOs
• PDO event timer
• PDO inhibit timer
• PDO transmit modes: event triggered, synchronous, asynchronous, cyclic, anticyclic, remote frame
• variable PDO identifier
• dynamic PDO mapping
• emergencys
• nodeguarding/lifeguarding/heartbeat
• EDS file

downloads

datasheet

EDS-file

ordering information