The hipecs-CIO151 module is a cost sensitive CANopen module with 8 analog inputs, 8 analog outputs and 2 digital input. The I/Os are galvanically separated from the bus system and the power supply. The outputs are short-circuit proof.

With the digital input a special mode can be activated, which shows the value of the analog input directly at the analog output.

system

• supply voltage 11 .. 32V DC (typ. 24V DC)
• cable cross section 0.08 .. 1,5 sqmm (AWG28 .. AWG14)
• temperature range 0 .. 55°C / -40 .. 70°C
• plastic housing for DIN rail mounting
• measurements ca. (LxBxH) 54 x 125 x 62 mm (with connector)

analog inputs

• 8 inputs (0..+10V)
• 16 bit resolution
• galvanic separation from controller system

analog outputs 

• 8 outputs (-10..+10V / 0..+10V)
• maximum permanent output current 10 mA per channel
• short circuit protected (current limitation 20mA)
• galvanic separation from controller system

digital inputs

• 2 inputs (24V)
• galvanic separation from controller system

CANopen

• 1 CAN-Bus according to ISO11898
• CAN-Baudraten adjustable up to 1 Mbit
• node number adjustable from 1 .. 127
• CANopen draft standard DS301 V4.0 / DS401 V2.1
• CANopen diagnosis LEDs
• 4 receive / 4 transmit PDOs
• 1 SDO server
• PDO event timer
• PDO inhibit timer
• PDO transmit modes: event triggered, synchronous, asynchronous, cyclic, anticyclic, remote frame
• variable PDO identifier
• dynamic PDO mapping
• emergencys
• nodeguarding/lifeguarding/heartbeat
• EDS file

downloads

datasheet

eds-file

ordering information