hipecs CIO60 CANopen current output 0..20mA

frenzel + berg hipecs CIO58 current output Modul with 2 channels for 4..20mA

The hipecs-CIO60 is a compact CANopen module with 2 current outputs for 0…20 mA signal. It is designed for extensions of PLC controller systems or similar applications. The I/Os are isolated from the bus system and also to each other. The resolution of current output is 12 bits. All output channels are protected against reverse polarity, over voltage conditions and against static discharges.

Setting of Node-ID and CAN baud rate is done using DIP switches.

In this module the complex CANopen standards DS301 and DS401 are implemented. All usual baud rates up to 1 MBit are supported. The module supports extended CAN frames with 29 Bit identifiers as well as the standard frames using 11 Bit identifiers. 

system

  • supply voltage 11 .. 32V DC (typ. 24V DC)
  • cable cross section 0.08 .. 1,5 sqmm (AWG28 .. AWG14)
  • temperature range 0 .. 55°C / -40 .. 70°C
  • plastic housing for DIN rail mounting
  • dimensions (LxBxH) 18 x 90 x 62 mm (with connector)

current output channels

  • 2 current outputs 0..20mA
  • resolution 12-Bit

CANopen

  • 1 CAN-Bus according to ISO11898
  • CAN-Baudraten adjustable up to 1 Mbit
  • node number adjustable from 1 .. 63
  • CANopen draft standard DS301 V4.2 / DS401 V3.1
  • CANopen diagnosis LEDs
  • 2 receive / 2 transmit PDOs
  • 1 SDO server
  • PDO event timer
  • PDO inhibit timer
  • PDO transmit modes: event triggered, synchronous, asynchronous, cyclic, anticyclic, remote frame
  • variable PDO identifier
  • dynamic PDO mapping
  • emergencys
  • nodeguarding/lifeguarding/heartbeat
  • EDS file

Downloads

datasheet

eds file

 

ordering information

article no.

article

housing

temperature
range (°C)

galvanic
isolation

EZ00000.2160.00

hipecs-CIO60-i

plastic

0..+55

yes

EZ00000.3060.00 hipecs-CIO60-ie plastic -40..+70 yes

 

 

TEXTPDF Download

support

technical support and help for frenzel + berg products

For technical questions please contact our support-service: support@frenzel-berg.de