hipecs CIO64 CANopen Modul with 4 PWM Outputs

frenzel + berg  digitales CANopen output module

hipecs-CIO64 is a CANopen I/O module with 4 short-circuit proof PWM-open-drain-outputs. Each output is able to provide a current of 2.5 Ampere. The outputs are suitable for switching electrical loads with a rated voltage of 24 V DC, e.g. RGBW LED stripes, valves etc. Pulsed signals are generated by 3 independent PWM units.

Setting of Node-ID and CAN baud rate is done using DIP switches.

In this module the complex CANopen standards DS301 and DS401 are implemented. All usual baud rates up to 1 MBit are supported.

system

  • supply voltage 11 .. 32V DC (typ. 24V DC)
  • cable cross section 0.08 .. 1,5 sqmm (AWG28 .. AWG14)
  • temperature range 0 .. 55°C / -40 .. 55°C
  • plastic housing for DIN rail mounting
  • dimensions (LxBxH) 18 x 90 x 62 mm (with connector)

output channels

  • 4 digital open drain outputs 24V / 2,5A

CANopen

  • 1 CAN-Bus according to ISO11898
  • CAN-Baudraten adjustable up to 1 Mbit
  • node number adjustable from 1 .. 63
  • CANopen draft standard DS301 V4.2 / DS401 V3.1
  • CANopen diagnosis LEDs
  • 4 receive / 4 transmit PDOs
  • 1 SDO server
  • PDO event timer
  • PDO inhibit timer
  • PDO transmit modes: event triggered, synchronous, asynchronous, cyclic, anticyclic, remote frame
  • variable PDO identifier
  • dynamic PDO mapping
  • emergencys
  • nodeguarding/lifeguarding/heartbeat
  • EDS file

Downloads

datasheet

eds file

 

ordering information

article no.

article

housing

temperature
range (°C)

galvanic
isolation

EZ00000.2462.00

hipecs-CIO62-i

plastic

0..+55

yes

EZ00000.3462.00 hipecs-CIO62-ie plastic -40..+55 yes

 

 

TEXTPDF Download

support

technical support and help for frenzel + berg products

For technical questions please contact our support-service: support@frenzel-berg.de