hipecs CIO103 CANopen I/O-Modul
The hipecs-CIO103 module is a compact CANopen I/O system with 8 digital inputs and 8 digital outputs. However, its output technology differs significantly from the other I / O modules. The power drivers of the module can each drive 2 amperes on all 8 outputs simultaneously and permanently, so that in many applications, follow-on drivers can be dispensed with. (in example for magnetic valves, for relais, ...).
Setting of Node-ID and CAN baud rate is done using coding switches.
In this module the complex CANopen standards DS301 and DS401 are implemented. All usual baud rates up to 1 MBit are supported.
system
- supply voltage 11 .. 32V DC (typ. 24V DC)
- cable cross section 0.08 .. 1,5 sqmm (AWG28 .. AWG14)
- temperature range 0 .. 55°C / -40 .. 55°C
- plastic housing for DIN rail mounting
- dimensions (LxBxH) 54 x 125 x 62 mm (with connector)
input digital
- 8 inputs (24V)
- Status-LEDs
output digital
- 8 output (24V)
- 2 amp output current each
- Status-LEDs
CANopen
- 1 CAN-Bus according to ISO11898
- CAN-Baudraten adjustable up to 1 Mbit
- node number adjustable from 1 .. 127
- CANopen draft standard DS301 V4.2 / DS401 V3.1
- CANopen diagnosis LEDs
- 4 receive / 4 transmit PDOs
- 1 SDO server
- PDO event timer
- PDO inhibit timer
- PDO transmit modes: event triggered, synchronous, asynchronous, cyclic, anticyclic, remote frame
- variable PDO identifier
- dynamic PDO mapping
- emergencys
- nodeguarding/lifeguarding/heartbeat
- EDS file
ordering information
article no. | article | housing | temperature | galvanic |
EZ00000.2203.01 | hipecs-CIO103-i | plastic | 0..+55 | yes |
EZ00000.3103.01 | hipecs-CIO103-ie | plastic | -40..+55 | yes |